Installation
HFQ can install all types of timber flooring as detailed in our products page. Whilst the majority of our work is the supply and installation if you are a builder or whether you have found your own products we can install them for you.
|
Sanding and Polishing
Generally there are three main types of finishes that are available.
Solvent based Polyurethane, Water based Polyurethane and Tung/Modified Oil. All these finishes are applied in 3 coats, each product has its own distinct advantages.
Solvent based Polyurethane
Solvent based Polyurethane is the most common of all finishes as it is the most durable and, like Tung Oil highlights the wood grain and brings out the richness of the darker timbers. The disadvantage with Polyurethane is that it does not allow the timber flooring to freely expand and contract and can break the surface seal between each board. This finish is available in Matt, Satin or Gloss.
Water based Polyurethane
Water based Polyurethane is the most environmentally friendly finish as it is odourless and quick drying. It is mainly used in maintaining the natural colour of light timbers (prevents yellowing). Water base polyurethane is available in commercial and domestic quality depending on the durability required. The main disadvantage with this finish is the higher cost of the product. This finish is also available in Matt, Satin or Gloss.
Tung/Modified Oil
Tung Oil the original oil based finish is still available today. Out of these three types of finish Tung Oil is the only finish that allows the timber flooring to expand and contract with out effecting the integrity of the finish. Its main disadvantage is the lack of durability when compared to polyurethane. Modified Oil has been formulated over the past ten years giving a similar appearance to Tung Oil with a more durable finish. If you are looking for that natural look and are not expecting the hardness of a polyurethane, then this is the finish for you. This finish is available in Satin or Gloss.
Alternative Finishes
As well as these three main finishes, there are other less common products such as natural oils and waxes. These finishes give a completely different look to the floor and the timber is left with a much "flatter" finish. The disadvantage with these types of finishes are that they are more labour intensive to apply and incur higher material costs. Some finishes require ongoing maintenance. |
|
Sound Proofing/Acousitic Underlays
With the ever increasing demand for hard floor surfaces such as parquetry, strip timber, ceramics, marble, stone and granite comes the need to provide sufficient impact sound isolation.
HFQ can provide and install Regupol acousitic matting to help you reach your body corporate requirements. Regupol prevents footfall noise transferring from floor to floor in all types of buildings.
Applications for Regupol Impact Sound Underlays:
- For use under timber and parquetry flooring.
- Units, flats, duplexs, apartment blocks.
- Hotels, hostels, motel accomodation.
- Industrial halls, libraries & hospitals.
- Schools, university living.
- Between floor screeds.
- Leisure areas, multiplex cinemas.
- Retail and supermarkets.
|
Floor Preparation
With a growing demand for renovations comes the need for removal of old floors. HFQ can remove old flooring and assist with floor preparation including:
- removal of tiles, vinyls, carpets, existing timber floors and parquetry
- grinding and removal of adhesives and chemicals
- and minor leveling works
|
 |
